During the fixed season, many birds hover above the crop, which in the long run will lead to a decrease in crop yield, and Bird nets will be created. Bird nets are the most used bird control equipment in agriculture, but how do you build bird nets?

Bird nets is one of the most used bird prevention facilities in agriculture, in a certain season, there are many birds flying around on crops, a long time this will lead to a decrease in crop yields, in the face of this problem, Bird nets play a very important role, but how is the construction of Bird nets?

1. The anchor is fixed on the ground, so that the pipe column can be strong and stable. Bird nets to connect the horizontal and longitudinal wires into a grid, after fixing the two ends of the wire, use a wire tightener to tighten the wire, and then fix, the next step can be to set up the net.

2. The erection of Bird nets should be set up according to the height of the fruit tree, and the column must exceed the height of the fruit tree by more than one meter and five meters. The steel pipe is erected every ten meters horizontally and every twenty meters longitudinally, and the bottom should be irrigated with cement, and the depth of the irrigation cement is about 70 cm.

3. Follow the pace of the network line. Place the net on the shelf and fix the two sides of the mesh cable. First, let's go through the nets of Skynet, open the Bird nets, find the side of the width, and use the nets to thread the grid. A section of rope is set aside at each end and tied to the edge of the grid at each end. This allows the width edge to be swung quickly and precisely during the installation. The blue or black end of Bird nets is a reinforced edge, which serves as a reinforcement to prevent the net from tearing.